how to replace mac pro hard drive with ssd

On the left side, you see physical hard drives and their respective logical volumes. You can also use cmd + r, but you will miss one important option in Disk Utility on Mojave.Īfter you boot into recovery mode, you enter Disk Utility. To boot into recovery mode, you will need to press cmd + option (alt) + r right after you turn on the MacBook. If you need to have a look at the replacement of your drive, find a video on YouTube. You can also replace screws after successful installation of the system. Now the cover holds tight and you can put screws into their places. You replace the bottom cover and push it gently in the middle until you will hear two clicks. After that, you insert new SSD with adapter into the slot or former one and refit the screw.

Make sure the connector has slid all the way inside the adapter. Next, you need to insert new SSD into adapter. Gently tear it off so you will see internal parts.Īfter that, you need to gently unscrew former SSD using Torx T5 screwdriver. After that, grab the cover at the display side of MacBook near the fan ribs. Do not apply excessive force and take your time. Gently unscrew 10 screws using P5 screwdriver from the bottom of your MacBook. Disk swapĪfter you have finished your backup, you can turn off your MacBook. You need to insert the flash drive and follow this simple guide.

I needed to boot a Linux and type in few commands to format my drive. To save time and transfer all the data and applications directly to the new disk, you should start with creating Time Machine backup.ĭisk speed with original SSD drive Linux boot drive I had to do some research to make it work but the seller assured me it should definitely work. I have installed it into my MacBook and … nothing happened.

My second choice was more expensive Sintech ST-NGFF2013 adapter (16$) from eBay.

After consulting with the seller, he told me it’s not supposed to work with NVMe drives. When I have put my new disk into my mid-2015 MacBook Pro 15”, nothing happened, and the disk did not show in the recovery console. First, I have ordered 3$ adapter from AliExpress. The part that took me the most time was the selection of correct adapter and waiting for it to be delivered.

Small dry brush to remove dust (optional).

M.2 to Apple proprietary adapter (Sintech ST-NGFF2013).

Pentalobe P5 (1.2mm) screwdriver for MacBook bottom cover.

How to replace mac pro hard drive with ssd